Transparent adhesive LED film and LED mesh for shopfronts, malls, arenas and events. Design, installation and content management.
Two products doing two different jobs. Mesh where you need resolution and brightness and the installation has to come down again. Film where no structure can be added.
An LED net on a free-standing structure, with or without glass. The open weave lets light and air through. Built from 250 mm strips with no limit on width or height, and dismounted and reinstalled elsewhere when the run ends.
A 2 mm film applied directly to existing glass: no substructure, no building work. At 1.3 kg per square metre it adds no load to the frame and follows curved surfaces.
The window keeps working after closing time: promotions, new collections, opening hours.
Structural glazing turned into a communication surface, with no steel substructure.
Glazing and balustrades that generate revenue: space you can sell to tenants and advertisers.
Sponsorable surfaces that light up during events and stay glass the rest of the time.
Installations you mount, dismount and bring to the next date.
Free-standing double-sided structures for lobbies, atriums and transit areas.
Analysis of the glass, exposure and viewing distances to define the right pixel pitch.
Sizing, cut to measure, power supply and integration with the existing system.
Applied to the glazed surface with no structural work and short site times.
Remote content management, scheduled playlists and direct after-sales support.
The cost depends on pixel pitch, size and installation complexity. Every project is quoted after a survey: send us the approximate surface dimensions and we’ll prepare a dedicated quote.
LED film is applied directly to the glass already in place, without replacing the frame and without structural work. LED mesh is mounted on dedicated lightweight structures, including curved surfaces.
LED mesh is a net on a free-standing structure: tighter pitch, higher brightness, and it can be dismounted and reinstalled elsewhere. Adhesive film goes onto the existing glass, weighs 1.3 kg/m² and needs no structure at all. Mesh where you need performance and reuse, film where nothing can be added.
It depends on the pitch: the further apart the LEDs, the more of the surface stays clear. The glazing keeps letting natural light through, but the film remains perceptible up close. During the survey we work out the right pitch for your surface and the distance it will be seen from.
Remotely: uploading videos and playlists, time scheduling, real-time updates. A single control point can manage multiple surfaces and sites.
Yes: high-brightness solutions stay readable even in full daylight. During design we choose brightness and pixel pitch based on exposure and viewing distance.
The film comes off without damaging the glass and without residue: the adhesive is silicone-based and lifts from one edge as you roll it up, with no solvents. Removal is permanent, though: once lifted the film cannot be reapplied, as the adhesive surface picks up contamination and loses its grip. The mesh is different — mounted on a structure, it can be dismounted and reinstalled elsewhere as often as needed.
Send us the approximate dimensions and a photo of the surface: we’ll reply with a tailored proposal.